180 Degree HD Camera with Enhanced Zoom and Two-Way Audio (ADC-V622)
- In stock, ready to ship
The ADC-V622 is Alarm.com's flagship camera. This wide-angle camera, designed for high-end residential video monitoring, sets itself apart through forward-looking features and a clean modern design. Covering a full 180° view, users can monitor large areas without having to purchase multiple cameras. With a simple button push on top of the camera, a user can initiate a video and Two-Way Audio call with the Alarm.com app.
For more information about Two-Way Audio, see Two-Way Audio Installation and User Guide.
Features
- Audio
- Power over Ethernet
- IR night vision
- 180° FOV
- Digital pan/tilt/zoom
- Tap to call out
- Bluetooth music streaming
Included accessories
- Camera
- Mounting hardware
- Quick installation guide
- Power adapter (10 feet)
- Video Analytics, Video Motion Detection, and sensor-triggered clips saved to the cloud
Specifications
Maximum resolution |
1920x1080 |
|---|---|
Recording compression |
H.264 |
Image sensor |
1/2.9" CMOS, 6.8 MP, 3096x2202 |
Lens |
1.62 mm, F2.3 |
Angle of view |
180° |
Low-light sensitivity |
0 lux with IR |
IR range |
Up to 5 meters (~15 feet) |
Image adjustments |
Brightness, contrast, saturation, sharpness |
Video motion detection |
3 windows, adjustable sensitivity and threshold |
Wireless connectivity |
802.11 b/g/n, 2.4 & 5 GHz |
Ethernet connection |
10/100Mbps RJ-45, PoE Enabled |
Simultaneous viewers |
10 |
Operating temperature |
0°C – 40°C (32°F – 104°F) |
Operating humidity |
20% – 80% (non-condensing) |
Max power consumption |
12 V DC, 12 W |
Dimensions (WxH) |
3.125" x 3.125" x 5.2" |
| Two-Way Audio compatibility | All versions |
Note: For information about frame rate (FPS), see What is the frame rate for video?.
Network requirements
| Minimum bandwidth |
Without Two-Way Audio: 0.5 Mbps With Two-Way Audio: 1 Mbps For more information, see What are the internet service and bandwidth requirements for Alarm.com video devices?. |
|---|---|
| PoE standard |
IEEE 802.3af For more information about PoE, see How does Power-over-Ethernet (PoE) work with Alarm.com video devices?. |
LED Guide
| LED pattern | Status | Description |
|---|---|---|
|
Solid green
|
Connected to internet | Local network and internet connection with Alarm.com IP. |
|
Blinking green
|
Local network connection |
Local network connection with local IP address, no internet. Note: If the LED does not go to a solid green after a few minutes, see Camera LED is blinking green. |
|
Solid red
|
No network connection | No local or Internet connection. |
|
Blinking red
|
System booting | Camera is booting. This typically takes 60-90 seconds. |
|
Blinking blue
|
WPS mode | WPS mode is active. To enter WPS mode, press the Menu button and use the Volume buttons to scroll to WPS Mode. |
|
Blinking white
|
AP mode | Wi-Fi access point (AP) mode is active. To enter AP mode, press the Menu button and use the Volume buttons to scroll to Access Point Mode. |
|
Blinking amber
|
Bluetooth pairing | Bluetooth pairing mode is active. To pair with Bluetooth, press the Menu button and use the Volume buttons to scroll to Bluetooth mode. |
|
Blinking red and green
|
Factory reset |
The camera is restoring to factory default settings. Caution: If the camera is already installed, it may need to be removed from the Alarm.com account and re-added after a factory reset. To perform a factory reset, press the Menu button and use the Volume buttons to scroll to the Factory Reset option. Follow the audio prompts to initiate a factory reset. |
