
Alarm.com Image Sensor Camera V3 - Retail
- In stock, ready to ship
- Inventory on the way
The Image Sensor (model ADC-IS-300-LP) delivers smarter security with instant visual verification of alarms and increased engagement through on-demand views. Our latest model* has been redesigned to deliver higher resolution images, improved night vision, and a wider field of view.
It is ETL certified, battery operated, and communicates with the customer’s security control panel. Swap it for a standard motion sensor in typical installations for increased customer value and higher account RMR.
Integrated with Alarm.com Interactive Services, images are easily accessible to customers. All uploaded images are viewable on the Alarm.com Customer Website or through the mobile apps. Users can even receive images in text or email alerts whenever an image is uploaded— whether in the event of an alarm, or on-demand for important events.
The Image Sensor is compatible with most Alarm.com supported panels. Some panels require additional hardware. See the System Compatibility table for more details. For more information on finding out whether or not the Image Sensor radio is built into the module, see Verify information for an Alarm.com cellular module.
Highlighted features
- ETL certified for UL639 and ULC S306
- 35 foot detection range with a 90 degree horizontal FOV
- Remotely configurable PIR sensitivity
- Pet immunity, etc.
- Easy installation
- Simple panel enrollment
- No broadband required; No router configuration
- Tri-color LED
- Battery powered
- Tamper detection, walk test mode, supervision
- Color images
- Night vision
- IR illumination
- Black and white images
- Wireless image transmission to panel
- Wireless image transmission to Alarm.com via cellular networks
Physical data
Dimensions (L x W x H) | 3.0” by 1.8” by 1.8” |
---|---|
Enclosure Material | Fire resistant plastic (UL 94) |
Enclosure Color | White |
Weight | 3.1 oz (with batteries, w/o mounting accessories) |
Operating Temperature | Indoors (32-110°F for non pet applications; 60-110°F for pet applications) |
Humidity | UL certified in up to 85% relative humidity |
Static Immunity | Yes |
Sealed Optics | No |
RFI Immunity | Yes |
Tamper Detection | Yes (orientation based detection) |
Motion detection
Technology | Dual element PIR |
---|---|
Detection Range | 35’ with a 90° horizontal FOV |
Lens Type | Fresnel lens |
PIR Sensitivity | Remotely configurable; 3 levels |
Pet Immunity | Yes with low sensitivity level only (up to 40 lbs) |
PIR White Light Immunity | Yes |
Walk Test Mode | Yes |
Post Activation Idle Time | 3 minutes (default when disarmed) |
Camera
Camera Type | CMOS |
---|---|
Focus | 1 ft. to infinity |
Night Vision and Capture | Yes- automatic infrared flash (invisible 240mW) |
Night Vision Range | Optimal within 20 feet |
Minimum Illumination w/o IR Flash | 3 lux |
Motion Triggered Images | Yes |
Images On-Demand | Yes |
Image Resolution | VGA (640x480 pixels) |
Installation
Mounting Height | 6 ft to 8 ft |
---|---|
Mounting Angle | 6°, 12°, or 18° down angle |
Mounting Options | Wall mounted w/ bracket (flat or corner mount) |
Wireless
Frequency | 900 MHz |
---|---|
Protocol | 802.15.4 |
Open Air Range | 400 feet |
Antenna | Helical chip antenna |
Wireless Supervision | Yes |
Encryption | Yes |
Regulatory compliance
FCC | FCC ID: YL6-143IS300 |
---|---|
IC | IC: 9111A-143IS300 |
RoHS | Compliant |
ETL | Certified for UL 639 compliance |
Electrical data
Operating Voltage | 2.3-3.5v |
---|---|
Current Consumption (typical) | <1mA |
Power Requirements | 2-AA 1.5v Lithium batteries |
Recommended Battery | Energizer Ultimate Lithium (included) |
Battery Life (typical) | Approximately 3 years |
System compatibility
The following table outlines the panel or module requirements with the Image Sensor Version 3:
Panel type | Panel or module requirements | Image Sensor limit |
---|---|---|
2GIG EDGE |
|
10 |
2GIG GC2e |
|
3 |
2GIG GC3 |
|
10 |
2GIG GC3e |
|
10 |
Interlogix Simon XT |
|
3 |
Interlogix Simon XTi |
|
3 |
Interlogix Simon XTi-5 |
|
3 |
Interlogix Concord |
|
3 |
DSC Impassa |
|
3 |
DSC PowerSeries Neo |
|
3 |
DSC PowerSeries Pro |
|
3 |
DSC Touch |
|
5 |
Qolsys IQ Panel |
Note: Qolsys may refer to the Image Sensor version 1 and 2 as QZ8100 and the Image Sensor version 3 as QZ8103. |
5 |
Qolsys IQ Panel 2 |
Note: Qolsys may refer to the Image Sensor version 1 and 2 as QZ8100 and the Image Sensor version 3 as QZ8103. |
5 |
Image Sensor service package add-ons
All service package options have upload limits that reset on the first day of each month. If the upload limit is reached in the previous month, the Image Sensor will resume uploading images according to its capture rules the following month. Images captured during an alarm always upload even if the upload limit is reached.
Note: Unused Image Sensor uploads do not carry over from month to month.
Images - Alarms |
|
---|---|
Images - Limited |
Note: This add-on is included by default in the Interactive, Interactive + Automation, and Commercial packages, and only applies to customers using a panel with a panel camera. |
Images - Plus |
Note: Alarm event uploads count towards the limit, but images are always taken in the event of an alarm regardless of if the upload limit was reached. |
Extra Image Events |
|
Note: For Qolsys panels, Image Upload Count displays in the service package. This option only applies towards the number of PIR camera images that get uploaded for each alarm event. For more information, see the panel-specific guide for Viewing the PowerG PIR camera images.
For additional information about service package add-ons, see What image captures are included in each Images service package?.
Questions?
Contact your Alarm.com Account Executive or Dealer Development Associate. You can also reach Alarm.com Dealer Support at 1-866-834-0470 or support@alarm.com.